Nordic ID Sampo S2 and AR series
Open the web interface, as indicated by the sticker on the bottom of the reader, e.g.
http://sampos2k183200532.local
Default username and password
- Username:
admin
- Password:
admin
Update to the latest firmware
Navigate to 'System Update', and make sure the reader version is at least 1.3.10. If the version is older, please download a new version here https://www.nordicid.com/support/downloads/nordic-id-sampo/ and install this
Download reader agent
Click here to download the reader agent.
Install reader agent
Navigate to 'Applications'. Select 'Install new application' in the tabbar
Select and upload the .zip file as provided by Nedap Harmony
This will take a minute
When completed, select 'Application list', and you should be able to see that the application has been installed and is running
Do not change default username or password
They are currently needed to be set to default to get the Reader Agent to work. Support for non-standard usernames and password will be added later.
Determine the Mac Address and Serial number
The Mac Address and Serial number of the reader are required to connect to a read point. The Mac Address and Serial can be found on the bottom of the reader, the will be labeled as "ETH MAC" and "S/N" respectively.
Updated 2 months ago